Last modified by Eric Nantel on 2023/01/30 15:50
From version 1.1 >
edited by Eric Nantel
on 2023/01/16 14:18
To version < 15.1 >
edited by Eric Nantel
on 2023/01/23 13:21
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Hidden
... ... @@ -1,1 +1,1 @@
1 -false
1 +true
Content
... ... @@ -1,150 +1,134 @@
1 1  {{html wiki="false" clean="true"}}
2 -{{html wiki="false" clean="true"}}
3 -<body bgcolor="#FFFFFF">
4 -<table border="0" cellpadding="0" cellspacing="0" >
2 +<body><table border="0" cellpadding="0" cellspacing="0" >
5 5   <tbody><tr>
6 - <td valign="top" ><font size="2" face="verdana"><strong>Polycarbonate Information Page<br>
7 - <br>
8 - Updated <!--webbot bot="Timestamp" startspan s-type="EDITED" s-format="%m/%d/%Y" -->07/30/2007<!--webbot bot="Timestamp" i-checksum="12528"
9 - endspan --></strong></font>
10 - <p><font size="2" face="verdana"><b>Why Polycarbonate?<br>
11 - </b>Some of our robots use Polycarbonate. Why, because it is very strong. The image to the right is of me trying really hard to bend one of the
12 - H2 bottom panels. It really hurt holding this long enough&nbsp; for the camera to snap the image. When I let go it returned to its normal flat
13 - shape, no worse for the wear. Now Polycarbonate is not indestructible, but it is very tough. A 1/8" thick x 1/4" wide strip can be
14 - broken, but it takes several back and forth bends before it finally breaks.&nbsp;&nbsp;</font></p>
15 - <p>&nbsp;</p>
4 + <td valign="top" align="left"><b><font size="2" face="Verdana">Humanoid
5 + Biped Torso Assembly Guide<br>
6 + Rev. 1.</font></b>
7 + <p><b><font size="2" face="Verdana">Updated <!--webbot bot="Timestamp"
8 + startspan s-type="EDITED" s-format="%m.%d.%y" -->
9 + <!-- #BeginDate format:Am3 -->12/21/2011<!-- #EndDate -->
10 + <!--webbot
11 + bot="Timestamp" i-checksum="12845" endspan --></font></b></p>
12 + <p><font face="Verdana" size="2"><b>Safety first!</b> Wear eye protection and never touch a powered robot!</font></p></td>
13 + <td align="center" valign="top" width="320"><font size="2" face="Verdana"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bt00.jpg" border="2" hspace="10" ><br>
14 + <b>Image of Humanoid Biped.</b></font></td>
15 + </tr>
16 + <tr>
17 + <td valign="top" align="left" colspan="2"><font face="Verdana" size="2">&nbsp;</font></td>
18 + </tr>
19 + <tr>
20 + <td valign="top" align="left"><font face="Verdana" size="2"><b>Lexan Preparation.<br>
21 + </b>The lexan pieces have a protective covering that needs to be removed before assembly. When the laser cuts, the covering melts into the cut
22 + edge which can make removal difficult. If you gently scrape the cut edge with a flat blade screwdriver, the covering can easily be lifted and
23 + peeled off.</font>
24 + <p><font face="Verdana" size="2">On smaller pieces the coverings can be more difficult to remove. If you have trouble you can gently scrape the
25 + cut edge, then use duct tape to lift the covering off.</font></p>
26 + <p><font face="Verdana" size="2">For further information on lexan, see <a href="https://wiki.lynxmotion.com/info/wiki/lynxmotion/view/support/polycarbonate-info-page/" target="_blank">this page</a>.</font></p></td>
27 + <td align="center" valign="top"><font face="Verdana" size="2"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/lexan01.jpg" alt="" hspace="10" border="2"><br>
28 + Lexan Preparation.</font></td>
29 + </tr>
30 + <tr>
31 + <td valign="top" align="left" colspan="2"><font size="2" face="Verdana">&nbsp;</font></td>
32 + </tr>
33 + <tr>
34 + <td valign="top" align="left"><font face="Verdana"><b><font size="2">Step
35 + 1.</font></b><font size="2"><br>
36 + Attach the hex spacers as shown, using 3/8" screws. The top four
37 + spacers and the one in the middle are 1.5"; put washers in between
38 + the these spacers and the lexan. The other four spacers are 1.0" and
39 + require no washers.</font></font>
40 + <p><font face="Verdana" size="2"><b>9 x <img border="2" src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/4375hscs.GIF" >
41 + 5 x <img border="2" src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/440nw.GIF" ></b></font></p>
16 16   </td>
17 - <td align="center" valign="top " width="320"><img src="./Information on Polycarbonate_files/lexan01s.jpg" border="2" hspace="10" width="320" height="240"><br>
18 - <strong><font size="2" face="verdana">Will it Break? No!<br>
19 - <br>
20 - </font></strong></td>
43 + <td align="center" valign="top" ><font size="2" face="Verdana"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bt01.jpg" border="2" hspace="10" ><br>
44 + Figure 1.</font></td>
21 21   </tr>
22 22   <tr>
23 - <td valign="top" ><font size="2" face="verdana"><b>Laser-cut Lexan properties</b>&nbsp;<br>
24 - The cut edge has a black residue which can easily be cleaned with a damp rag or paper towel. It is normal and can't be helped. When the residue
25 - is cleaned off, the edge will still be darker than the material. The dark edge is going to be present no matter what color the Lexan is. Most
26 - people like the way the cut edge looks, but there are some who would prefer not to have the dark edge. Technically, it would be possible to try
27 - to polish the edges, but beware it would be a very labor intensive project, and not worth the trouble in my opinion.&nbsp;<br>
28 - <br>
29 - <br>
30 - </font></td>
31 - <td align="center" valign="top" ><img src="./Information on Polycarbonate_files/lexan02.jpg" border="2" hspace="10" width="320" height="240"><br>
32 - <font size="2" face="verdana">Figure 1.<br>
33 - <br>
34 - </font></td>
47 + <td valign="top" align="left" colspan="2"><font size="2" face="Verdana">&nbsp;</font></td>
35 35   </tr>
36 36   <tr>
37 - <td valign="top" ><font size="2" face="verdana"><b>Lexan protective covering</b>&nbsp;<br>
38 - The Lexan pieces have a protective covering that needs to be removed before assembly. When the laser cuts, the covering melts into the cut edge
39 - which can make removal difficult. If you gently scrape the cut edge with a metal edge, such as a flat blade screw driver, the covering can
40 - easily be separated with a thumb nail.&nbsp;</font></td>
41 - <td align="center" valign="top" ><img src="./Information on Polycarbonate_files/lexan04.jpg" border="2" hspace="10" width="320" height="240"><br>
42 - <font size="2" face="verdana">Figure 2.<br>
43 - <br>
44 - </font></td>
50 + <td valign="top" align="left"><font face="Verdana"><b><font size="2">Step
51 + 2.</font></b><font size="2"><br>
52 + Use snap rivet fasteners to attach two servos as shown. Note that the
53 + servo horn is closest to the bottom of the image.</font></font>
54 + <p><font face="Verdana" size="2"><b>8 x <img border="2" src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/nrf01.GIF" ></b></font></p>
55 + </td>
56 + <td align="center" valign="top" ><font size="2" face="Verdana"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bt02.jpg" border="2" hspace="10" ><br>
57 + Figure 2.</font></td>
45 45   </tr>
46 46   <tr>
47 - <td valign="top" ><font size="2" face="verdana"><b>Peal and Separate</b><br>
48 - Once it is started the covering easily peels off of the pieces. Note, you only want to scrape the edge. If done properly the pieces will not be
49 - damaged at all.&nbsp;<br>
50 - </font>
51 - <p>&nbsp;</p>
60 + <td valign="top" align="left" colspan="2"><font size="2" face="Verdana">&nbsp;</font></td>
61 + </tr>
62 + <tr>
63 + <td valign="top" align="left"><font face="Verdana"><b><font size="2">Step
64 + 3.</font></b><font size="2"><br>
65 + Attach the middle panel using 3/8" screws.</font></font>
66 + <p><font face="Verdana" size="2"><b>4 x <img border="2" src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/4375hscs.GIF" ></b></font></p>
52 52   </td>
53 - <td align="center" valign="top" ><img src="./Information on Polycarbonate_files/lexan05.jpg" border="2" hspace="10" width="320" height="240"><br>
54 - <font size="2" face="verdana">Figure 3.<br>
55 - <br>
56 - </font></td>
68 + <td align="center" valign="top" ><font size="2" face="Verdana"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bt03.jpg" border="2" hspace="10" ><br>
69 + Figure 3.</font></td>
57 57   </tr>
58 58   <tr>
59 - <td valign="top" ><font size="2" face="verdana"><b>Stubborn Coverings</b><br>
60 - From time to time the coverings can be more difficult to remove. If you have trouble you can gently scrape the cut edge as explained above, then
61 - put a piece of Duct Tape over it, then rip it up. This really works pretty well.&nbsp;</font></td>
62 - <td align="center" valign="top" ><img src="./Information on Polycarbonate_files/lexan09.jpg" border="2" hspace="10" width="320" height="240"><br>
63 - <font size="2" face="verdana">Figure 4.<br>
64 - <br>
65 - </font></td>
72 + <td valign="top" align="left" colspan="2"><font size="2" face="Verdana">&nbsp;</font></td>
66 66   </tr>
67 67   <tr>
68 - <td valign="top" ><font size="2" face="verdana"><b>The Finish</b><br>
69 - Lexan has a beautiful mirror smooth finish. However, in time it will get tiny surface scratches due to cleaning and normal wear and tear. It
70 - isn't really that noticeable, but under the right conditions it can be visible.&nbsp;Note: this step is optional!</font>
71 - <p><font size="2" face="verdana">There are some options for modifying the finish.</font></p>
72 - <p><font size="2" face="verdana">The Lexan parts can be sand blasted with a fine medium. I especially like the look on the black
73 - components.&nbsp;&nbsp;</font></p>
74 - <p><font size="2" face="verdana">The parts can be lightly sanded by hand, or with a random orbit sander with extra fine sand paper. This is easy
75 - to do, but should be done carefully to avoid removing too much material. The key is to make light even passes with the sander.&nbsp;</font></p>
76 - <p><font size="2" face="verdana">The result is a durable charcoal gray appearance that can't be scratched, because it has been pre-scratched in
77 - every direction.<br>
78 - <br>
79 - Lexan can also be painted, but use paint specifically designed for use with Polycarbonate. Your local hobby shop can help with this.&nbsp;There
80 - has also been some new developments in the paint industry specifically for plastics. Check out Krylon Fusion.&nbsp;<br>
81 - &nbsp;</font></p>
75 + <td valign="top" align="left"><font face="Verdana"><b><font size="2">Step
76 + 4.</font></b><font size="2"><br>
77 + Ensure that the plastic servo hinges have the metal nut inserted before proceeding. <br>Using double-sided tape, attach the plastic servo hinges as shown, and set the other three servos
78 + into position as shown.</font></font></td>
79 + <td align="center" valign="top" ><font size="2" face="Verdana"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bt04.jpg" border="2" hspace="10" ><br>
80 + Figure 4.</font></td>
81 + </tr>
82 + <tr>
83 + <td valign="top" align="left" colspan="2"><font size="2" face="Verdana">&nbsp;</font></td>
84 + </tr>
85 + <tr>
86 + <td valign="top" align="left"><font face="Verdana"><b><font size="2">Step
87 + 5.</font></b><font size="2"><br>
88 + Attach the <a href="http://www.lynxmotion.com/images/html/build089.htm">legs</a>, using the ball bearing hardware and four #2 tapping screws.<br> Note that only the C-brackets are shown for clarity.</font></font>
89 + <p><font face="Verdana" size="2"><b>2 x <img border="2" src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bb01.gif" >
90 + 4 x <img border="2" src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/2250phts.GIF" ></b></font></p>
82 82   </td>
83 - <td align="center" valign="top" ><img src="./Information on Polycarbonate_files/lexan03.jpg" border="2" hspace="10" width="320" height="240"><br>
84 - <font size="2" face="verdana">Figure 5.<br>
85 - <br>
86 - </font></td>
92 + <td align="center" valign="top" ><font size="2" face="Verdana"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bt08.jpg" border="2" hspace="10" ><br>
93 + Figure 5.</font></td>
87 87   </tr>
88 88   <tr>
89 - <td valign="top" ><font size="2" face="verdana">Here is an image of our old Pan and Tilt with the&nbsp;random orbit finish.<br>
90 - &nbsp;</font></td>
91 - <td align="center" valign="top" ><img src="./Information on Polycarbonate_files/lexinf06.jpg" border="2" hspace="10" width="320" height="240"><br>
92 - <font size="2" face="verdana">Figure 6.<br>
93 - &nbsp;</font></td>
96 + <td valign="top" align="left" colspan="2"><font size="2" face="Verdana">&nbsp;</font></td>
94 94   </tr>
95 95   <tr>
96 - <td valign="top" ><font size="2" face="verdana"><b>Finishing the holes</b><br>
97 - The holes in the panels just need a bit of a push and they just fall out. I am using a 3/32" ball end hex driver here. It works quite well
98 - and it's required to build the kits anyway.&nbsp;&nbsp;<br>
99 - </font></td>
100 - <td align="center" valign="top" ><img src="./Information on Polycarbonate_files/lexan06.jpg" border="2" hspace="10" width="320" height="240"><br>
101 - <font size="2" face="verdana">Figure 7.<br>
102 - <br>
103 - </font></td>
99 + <td valign="top" align="left"><font face="Verdana"><b><font size="2">Step
100 + 5.</font></b><font size="2"><br>
101 + Attach the 3/4" spacers to the backpack panel using 1/4" screws. <br> Latest torso design has SSC-32 facing left or right. </font></font>
102 + <p><font face="Verdana" size="2"><b>4 x <img border="2" src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/4250hscs.GIF" ></b></font></p>
103 + </td>
104 + <td align="center" valign="top" ><font size="2" face="Verdana"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bt05.jpg" border="2" hspace="10" ><br>
105 + Figure 5.</font></td>
104 104   </tr>
105 105   <tr>
106 - <td valign="top" ><font size="2" face="verdana"><b>Separating the parts</b><br>
107 - Some of the kits have parts nested to simplify packaging and reduce errors. Larger parts can be snapped apart. The smaller parts can be easily
108 - separated with a hobby knife. Be careful! Use a large wood backer and work slowly.&nbsp;<br>
109 - </font></td>
110 - <td align="center" valign="top" ><img src="./Information on Polycarbonate_files/lexan07.jpg" border="2" hspace="10" width="320" height="240"><br>
111 - <font size="2" face="verdana">Figure 8.<br>
112 - <br>
113 - </font></td>
108 + <td valign="top" align="left" colspan="2"><font size="2" face="Verdana">&nbsp;</font></td>
114 114   </tr>
115 115   <tr>
116 - <td valign="top" ><font size="2" face="verdana"><b>Separating the optional openings</b><br>
117 - Some of the kits have optional openings that need to be cut out before assembly. Carefully press a flat Exacto knife into the opening where the
118 - part is attached to the main panel.&nbsp;<br>
119 - <br>
120 - Caution! Do not attempt to snap these optional openings apart. &nbsp;<br>
121 - </font></td>
122 - <td align="center" valign="top" ><img src="./Information on Polycarbonate_files/lexan08.jpg" border="2" hspace="10" width="320" height="240"><br>
123 - <font size="2" face="verdana">Figure 9.<br>
124 - <br>
125 - </font></td>
111 + <td valign="top" align="left"><font face="Verdana"><b><font size="2">Step
112 + 6.</font></b><font size="2"><br>
113 + Sandwich the three servos in between the front panel and the backpack
114 + panel as shown. <br>Attach the backpack panel using 3/8" screws. Note servo orientation.</font></font>
115 + <p><font face="Verdana" size="2"><b>5 x <img border="2" src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/4375hscs.GIF" ></b></font></p>
116 + </td>
117 + <td align="center" valign="top" ><font size="2" face="Verdana"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bt06.jpg" border="2" hspace="10" ><br>
118 + Figure 6.</font></td>
126 126   </tr>
127 127   <tr>
128 - <td valign="top" ><font size="2" face="verdana"><b>Caution!</b><br>
129 - Lexan is the same material used in bullet proof glass. It is very strong, but has one important weakness. In the presence of certain chemicals,
130 - it will "craze". This means it will crystallize, become brittle, and even shatter. One substance in particular to watch out for is 1,
131 - 1, 1 Trichloroethane. This is a solvent, present in some motor cleaners and degreasers, which will crystallize polycarbonate on contact.
132 - Trichloroethane is a liquid CFC and has been removed from use, but may still be out there. Some products have switched to its cousin, 1, 1,
133 - Difluoroethane. While not as vigorously reactive as the previous chemical, it is still capable of crazing Lexan if allowed to come into contact
134 - for too long. Also avoid using Loctite or thread locks on the chassis assembly. They are not necessary and may cause damage to the Lexan.<br>
135 - <br>
136 - </font></td>
137 - <td align="center" valign="top" ></td>
121 + <td valign="top" align="left" colspan="2"><font size="2" face="Verdana">&nbsp;</font></td>
138 138   </tr>
139 139   <tr>
140 - <td valign="top" ><font size="2" face="verdana"><b>Other Information</b><br>
141 - Lexan is a bit on the expensive side compared to foam PVC and acrylic, but the added strength makes it well worth the added cost. It can be
142 - drilled and cut easily using standard wood working tools. Use a low speed on the tool and low feed rates to prevent the plastic from melting to
143 - the tool. Have fun building your robots, and above all be careful!<br>
144 - &nbsp;</font></td>
145 - <td align="center" valign="top" ></td>
124 + <td valign="top" align="left"><font face="Verdana"><b><font size="2">Step
125 + 7.</font></b><font size="2"><br>
126 + Attach the SSC-32 to the backpack (recent torso design has the SSC-32 facing left or right), using 1/4" screws.</font></font>
127 + <p><font face="Verdana" size="2"><b>4 x <img border="2" src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/4250hscs.GIF" ></b></font></p>
128 + </td>
129 + <td align="center" valign="top" ><font size="2" face="Verdana"><img src="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v1-robots/ses-v1-bipeds/humanoid-biped-torso/WebHome/bt07.jpg" border="2" hspace="10" ><br>
130 + Figure 7.</font></td>
146 146   </tr>
147 147  </tbody></table>
148 148  </body>
149 149  {{/html}}
150 -{{/html}}
lexan01s.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +11.4 KB
Content
lexan02.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +9.9 KB
Content
lexan03.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +6.9 KB
Content
lexan04.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +7.8 KB
Content
lexan05.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +5.9 KB
Content
lexan06.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +9.8 KB
Content
lexan07.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
lexan08.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +10.0 KB
Content
lexan09.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +9.2 KB
Content
lexinf06.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +43.8 KB
Content
Copyright RobotShop 2018