Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -4,19 +4,22 @@
4	4
5	5	= Connection =
6	6
7		-Connection to the servo is done automatically, via any properly installed USB to serial interface like the LSS Adapter board. Ensure the board is recognized by the computer and if not, install the proper drivers. The software automatically scans all standard baud rates
	7	+Connection to the servo is done automatically, via any properly installed USB to serial interface like the LSS Adapter board. Ensure the board is recognized by the computer and if not, install the proper drivers. The software automatically scans all standard baud rates using ID254 (broadcast ID) and waits for a reply from the servo connected.
8	8
9	9	= Firmware Update =
10	10
11		-The LSS Config serves as the main software to update the servo's onboard firmware / programming.
	11	+The LSS Config serves as the main software to update the servo's onboard firmware / programming. An internet connection is needed in order for the software to check if an online update is available.
12	12
	13	+= Servo Control =
13	13
14		-Servo Control
	15	+The servo control section allows you to visually move the servo and change a variety of parameter.
15	15
16	16	{More to come}
17	17
18		-Servo Sensor Graph
	19	+= Sensor Graph =
19	19
	21	+The sensor graphing feature of the software allows you to select and display, with respect to time
	22	+
20	20	{More to come}
21	21
22	22	Command Line