Wiki source code of LSS - Power Hub
Version 1.1 by Coleman Benson on 2018/03/28 13:29
Show last authors
| 1 | |
| 2 | [[image:LSS - Power Hub - Main (1000px).png||height="300" width="336"]] |
| 3 | |
| 4 | = Description = |
| 5 | |
| 6 | LSS Power Hub provides a simple and quick solution to supply power and operate the LSS. It is required to split the LSS bus from the LSS Adapter/LSS to 3 LSS ports. It also allows powering 3 LSS on-board ports with a separate power supply by removing a jumper. |
| 7 | |
| 8 | |
| 9 | |
| 10 | = Features = |
| 11 | |
| 12 | * 4 x LSS connectors |
| 13 | * Onboard 2.1mm x 5.5mm female barrel jack |
| 14 | * Tx and Rx pins broken out to provide control of the LSS servos using an external UART serial device |
| 15 | * Jumper to power 3x LSS channels through the main power supply or from a separate one (allows additional power to be input where many servos are daisy chained) |
| 16 | |
| 17 | ((( |
| 18 | = Specifications = |
| 19 | ))) |
| 20 | |
| 21 | * LSS servo mountable |
| 22 | * Maximum current of 3A from the main supply |
| 23 | * Dimensions : 1" x 1.25" (with mounting tabs), 1" x 1" (without mounting tabs) |
| 24 | |
| 25 | ((( |
| 26 | = Schematic = |
| 27 | |
| 28 | * //Coming soon// |
| 29 | |
| 30 | ((( |
| 31 | = //Mounting// = |
| 32 | ))) |
| 33 | ))) |
| 34 | |
| 35 | ((( |
| 36 | //{3D CAD image mounted on a servo)// |
| 37 | |
| 38 | = //Dimensions// = |
| 39 | |
| 40 | //[[image:LSS - Power Hub - Dimensions (1000px).png||height="318" width="400"]]// |
| 41 | ))) |